Resources · Water

How Deep Is the Water Table in Strathcona County?

Buyers ask this before they bid, and drillers ask it before they quote. In Strathcona County, nearby well records point to an average completed well depth of about 40 m, with static water levels often in the 5–16 m range. The predominant aquifer on file for this part of Alberta is the Buried-valley sands and Paskapoo bedrock.

Those numbers are county-scale context. They are not a promise for the quarter you are walking. The depth and static-level figures are regional estimates from typical Alberta well records in this belt, not a surveyed water table on your parcel.

Strathcona County includes both river-valley lots and upland benches. Valley parcels can sit closer to alluvial water; upland wells more often finish in bedrock. Read the well ID, not just the neighbour’s story.

What a “water table” number actually is in Strathcona County

Around Sherwood Park and the rest of Strathcona County, people use “water table” for three different things:

• **Static water level** — the resting height of water in a completed well, measured from ground surface.
• **Completion depth** — how far the driller had to go to find a usable interval.
• **Seasonal high water** — how close water sits to the surface in a wet year, which matters for basements, septic, and dugouts.

A listing that says “good water at 80 feet” is usually mixing those ideas. Eighty feet of steel is a completion depth. The pump may still hang much shallower if the static level is high. Or the well may be deep and the static level may still sit far down the hole in late summer.

In Strathcona County, treat 40 m as a planning band for *completion*, and 5–16 m as a planning band for *static level*. If a seller’s story sits far outside both bands, ask for the well ID and the last pump test.

What this means before you drill in Strathcona County

Budget three line items on a Strathcona County acreage, not one:

• **Drilling and casing** to a depth that can overshoot the neighbour’s well. In this county, planning around 40 m plus a contingency is more honest than copying the shallowest well on the road.
• **A pump test**, not a “we hit water” photo. Yield, drawdown, and recovery decide whether the well is a household supply.
• **Water chemistry**. Iron, hardness, sulphur, and bacteria are independent of depth. A cheap shallow well can still need treatment.

The Buried-valley sands and Paskapoo bedrock is common in this part of the province, but contacts shift. A buried-valley sand and a bedrock sandstone can sit under adjacent quarters. That is why a free parcel report that plots nearby well records is worth more than a single county average.

Flood and surface water are a separate file. In Strathcona County, notable mapped or commonly discussed hazard areas include North Saskatchewan River valley, Oldman Creek. A wet corner of a field is not automatically a well. It may be a wetland, a flood fringe, or both.

Reading a well record in Strathcona County

Alberta well reports usually list location, date, lithology, completion interval, static level, and a test rate. When you pull neighbours near Sherwood Park:

• Prefer wells within a kilometre, then compare geology, not just depth.
• Ignore abandoned holes unless you want to know where *not* to drill.
• Note the year. A 1978 farm well and a 2019 domestic well are not the same construction standard.
• If three nearby wells finish near 40 m and one is 15 m, ask why. The shallow one may be a sand point, a dugout well, or a different aquifer.

Permits, setbacks, and the rest of the Strathcona County water file

A new well in Strathcona County is only one approval. Earthworks for a pond, a dugout, or a crossing can trigger the Water Act. Mapped wetlands near Sherwood Park and across Strathcona County are common enough that you should not assume a “just a slough” story. Keep well planning and wetland planning in two piles so a good aquifer does not talk you into filling a regulated wetland.

See this for your specific parcel

County averages help you decide whether a listing is in the right universe. They cannot replace a pin on the map.

Generate a free land report for a property in Strathcona County →

The report is built to show water context, nearby records where available, and the other pillars — terrain, wetlands, climate, vegetation — on the same parcel.

Common questions

Is Strathcona County a good place to drill a well?

Many rural parcels in Strathcona County use private wells. Whether yours is “good” depends on the aquifer interval, chemistry, and a pump test — not the county average.

Can I use the neighbour’s well depth in Strathcona County?

Only as a hint. Geology can change between quarters. Pull the well ID and lithology before you copy a depth into a budget.